Benefits of Low Flow Shower Heads

shower headAccording to the Environmental Protection Agency, bathing and showering take up 17% or more of residential indoor water usage on a yearly basis. Therefore, reducing the amount of water used for showering improves water conservation and energy efficiency.

The US federal laws today require that all showerhead manufacturers should not put on the market any showerheads whose flow rate is over 9.5 liters per minute. You can get low-flow fixtures at $10 – $20 each and save water by about 25% to 60%.

Types of Low-Flow Showerheads

There are two types of low-flow showerheads whose flow rate is lower than 2.5 gallons per minute. These include laminar flow and aerating.

Aerating fixtures mix water with air to give you a misty spray. Laminar-flow showerheads on the other hand form individualized water streams.

Do you live in areas with humid climate? Laminar-flow fixtures shall work well for you. That is because they do not give off as much steam as the aerating type does.

Low-flow showerheads have been used in the effort to reduce residential water consumption for some time. Unlike the earlier models, current low-flow types have got smaller water openings that allow them to provide functionality with sufficient water while still using less water. We suggest you to visit finestshower for more information on shower heads and their reviews.

These fixtures provide the following benefits:

Water use These accessories help to conserve water. Regardless of what one thinks about the environment, conserving water is directly beneficial to homeowners. These showerheads are said to reduce household water consumption by 40% or more. Besides the noble cause of conservation, people that use these showerheads experience tangible benefits. They are felt in their wallets because low water consumption leads to a friendly water bill. While new nonlow- flow shower head types give off 2.5 gallons per minute, low-flow shower heads give 2 gallons per minute or less. However, if you are still using the old showerhead models, your output is 5 – 8 gallons per minute.

Energy use

low-flow-showerheadThe process of running water consumes energy because water needs to get heated. For someone using a low-flow fixture, the amount of energy used shall be less when compared to one using a nonlow-flow fixture. Therefore with less heated water used comes a benefit of less energy dissipated. That also means that the energy bill reduces.

Carbon dioxide emission Low water consumption leads to low energy use hence low carbon dioxide emissions.

However, there are some misconceptions surrounding the use of low-flow fixtures. The most common one is that people think that low-flow equals low pressure. Older low-flow models were less efficient when compared to the newer low-flow models. That is because they brought the water pressure down to a trickle. However, newer models have small holes coupled with air hence intense force that enables you to enjoy your shower. So, ladies, you need not worry, with a low-flow showerhead, you can still wash that shampoo out of your hair very well.

After seeing all those benefits, I thought it would be wise to review some of the features that a low-flow showerheads might have as well as their benefits.

Shower timerTypes of Low-Flow Showerheads

The Shower Manager allows you to set a time for how long showers should last. At one minute before the time limit, you shall get a warning. If the water is not turned off, the flow shall turn into an uncomfortable trickle. There is no button to override it so you can not cheat the system.

Pause button

Some fixtures like the Water Pik EcoFlow have got a pause button. It allows you to stop and

restart the water at the same temperature as and when you please.

Temperature gauge

If your choice fixture is the Road Runner showerhead, then you shall find that it comes with a feature that allows the water to trickle until it has got to your desired temperature. This function shall not allow the water to flow at full pressure until you authorize it to even when the temperature has reached your liking. That means that the problem of wasting water as one waits for it to get to a particular temperature is solved.

Alternatives to exceptional low-flow

The makers of showerhead fixtures such as Delta understand that there are times when you want that water to flow in bigger quantities. That is why they have included a feature to your fixture that allows you to have your water flowing at 2.5 gpm for the days you need it.

However, they also avail you with the option of lowering it to 1.6 gpm for those days when a light shower is enough.

I hope that this information has made things clear.

Also visit Vacuum Sealer Usage & Benefits to learn more tips on saving!


Leave a Reply

Your email address will not be published. Required fields are marked *